Tag Archives: openldap tutorial

OpenLDAP password policy – Managing users accounts

« OpenLDAP password policy » is an overlay that allows you to set up an efficient management of the authentication accounts of people referenced in the OpenLDAP directory. This management concerns in particular the passwords of these persons. This article will show how to configure the OpenLDAP server to activate the« password policy » overlay and implement this management. Prerequisite: The article Adding data to the directory and its prerequisites are read. The OpenLDAP server is installed and the data of the article are entered.

1. Enable ppolicy schema (OpenLDAP password policy)

By default, the ppolicy schema is installed: /etc/ldap/schema/ppolicy.ldif, but not enabled. To enable it:
ldapmodify -x -a -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f /etc/ldap/schema/ppolicy.ldif
To check the schema loading :
ldapsearch -x -s one -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -b cn=schema,cn=config cn -LLL

dn: cn={0}core,cn=schema,cn=config
cn: {0}core

dn: cn={1}cosine,cn=schema,cn=config
cn: {1}cosine

dn: cn={2}nis,cn=schema,cn=config
cn: {2}nis

dn: cn={3}inetorgperson,cn=schema,cn=config
cn: {3}inetorgperson

dn: cn={4}ppolicy,cn=schema,cn=config
cn: {4}ppolicy
Notice the presence of the ppolicy schema in addition to the four schemas that are enabled by default.

2. Enable the ppolicy overlay

Create the LDIF command file: ppolicy-module.ldif
vi ppolicy-module.ldif
Enter in the editor and save:
dn: cn=module{0},cn=config
changeType: modify
add: olcModuleLoad
olcModuleLoad: ppolicy
Execute the modify command contained in the file:
ldapmodify -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f ppolicy-module.ldif
To check the module activation:
ldapsearch -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -b cn=config "(objectClass=olcModuleList)" olcModuleLoad -LLL

dn: cn=module{0},cn=config
olcModuleLoad: {0}back_mdb
olcModuleLoad: {1}ppolicy
Notice the presence of the ppolicy module in the list, while default only back_mdb (database management module) is enabled.

3. Configuring the ppolicy overlay

Create the LDIF command file: ppolicy-conf.ldif
vi ppolicy-conf.ldif
Enter in the editor and save:
dn: olcOverlay=ppolicy,olcDatabase={1}hdb,cn=config
objectClass: olcPpolicyConfig
olcOverlay: ppolicy
olcPPolicyDefault: cn=ppolicy,dc=ldaptuto,dc=net
olcPPolicyUseLockout: FALSE
olcPPolicyHashCleartext: TRUE
Add the entry contained in the file:
ldapmodify -x -a -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f ppolicy-conf.ldif
To verify that the configuration is actually enabled:
ldapsearch -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -b cn=config "(objectClass=olcPpolicyConfig)" -LLL

dn: olcOverlay={0}ppolicy,olcDatabase={1}hdb,cn=config
objectClass: olcPPolicyConfig
olcOverlay: {0}ppolicy
olcPPolicyDefault: cn=ppolicy,dc=ldaptuto,dc=net
olcPPolicyHashCleartext: TRUE
olcPPolicyUseLockout: FALSE
Three configuration settings:
  1. olcPPolicyDefault: Specifies a configuration DN used by default (see next paragraph).
  2. olcPPolicyHashCleartext: Indicates whether passwords should be encrypted systematically. Advise: This setting should be TRUE.
  3. olcPPolicyUseLockout: Indicates whether the error message returned when attempting to connect to a locked account is a message specific to that locked state (TRUE), or a general failed login message (FALSE). FALSE is more secure (no indication to a possible pirate), TRUE is more convenient.

4. Configure a password policy

We will configure the entry specified in the olcPPolicyDefault parameter of the ppolicy overlay configuration, i.e. cn=ppolicy,dc=ldaptuto,dc=netTo do this we will create an LDIF file that will allow to add this entry.
vi ppolicy-defaut.ldif
Enter in the editor and save:
dn: cn=ppolicy,dc=ldaptuto,dc=net
objectClass: device
objectClass: pwdPolicyChecker
objectClass: pwdPolicy
cn: ppolicy
pwdAllowUserChange: TRUE
pwdAttribute: userPassword
pwdCheckQuality: 1
pwdExpireWarning: 600
pwdFailureCountInterval: 30
pwdGraceAuthNLimit: 5
pwdInHistory: 5
pwdLockout: TRUE
pwdLockoutDuration: 0
pwdMaxAge: 0
pwdMaxFailure: 5
pwdMinAge: 0
pwdMinLength: 5
pwdMustChange: FALSE
pwdSafeModify: FALSE
Add the entry contained in the file:
ldapmodify -x -a -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f ppolicy-defaut.ldif
To verify the result:
ldapsearch -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -b dc=ldaptuto,dc=net "(objectClass=pwdPolicy)" -LLL
16 Settings (all listed attributes) allow you to set up an efficient and effective policy for passwords and user account management. The following command gives you full details about these parameters:
man slapo-ppolicy
For example, pwdMinLength has been set to 5, which means that a password can not be less than 5 characters in length. Let’s test:
ldappasswd -x -H ldap://localhost -D uid=durand,ou=people,dc=ldaptuto,dc=net -w durand -s dura

Result: Constraint violation (19)
Additional info: Password fails quality checking policy
This command allows Alain Durand to log in with his username and password (-D uid=durand,ou=people,dc=ldaptuto,dc=net and -w durand) and change this password with the new value provided (-s dura). The command fails because the new password has only 4 characters.
ldappasswd -x -H ldap://localhost -D uid=durand,ou=people,dc=ldaptuto,dc=net -w durand -s duran
The command succeeds because the new password has 5 characters. To verify the password modification:
ldapsearch -x -H ldap://localhost -D uid=durand,ou=people,dc=ldaptuto,dc=net -w durand -b dc=ldaptuto,dc=net

ldap_bind: Invalid credentials (49)
The old password is not accepted and the same command with the new password: duran, should succeed. Another setting: pwdCheckModule controls the quality of the contents of passwords. This setting specifies the file name of a native shared library that ensures this function. Before informing it, it will first be necessary to ensure that this library is present. pqChecker is a library that can be used to control passwords content strength for ppolicy overlay. To use it, you should modify the default password policy setting.
vi modifpp.ldif
Enter in the editor and save:
dn: cn=ppolicy,dc=ldaptuto,dc=net
changeType: modify
add: pwdCheckModule
pwdCheckModule: pqchecker.so
Execute the modify command contained in the file:
ldapmodify -x -a -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f modifpp.ldif
pqchecker.so is the quality control library for the contents of passwords. By default it is installed at /usr/lib/ldap. It requires by default a password with at least 1 uppercase, 1 lowercase, 1 digit and 1 special character (not alphabetic). Further details about it may be read on http://www.meddeb.net/pqchecker]]>

Using OpenLDAP to protect access to a website

Access is only allowed for people that are referenced in the LDAP directory. Prerequisites: The article Adding data to the directory and its prerequisites are read. Le serveur OpenLDAP est installé et les données des exemples de l’article sont entrées.

1. Installing the Apache web server

sudo apt-get install apache2

2. Set up a test website

To make it simple, we will use the default site. Save the entry page of this site:
sudo cp -p /var/wwww/index.html /var/www/index.html.orig
Create the website main page
sudo vi /var/www/index.html
And replace the content with:
<html>
  <header>
    <title>OpenLDAP tutorial</title>
  </header>
  <body>
    <h5>OpenLDAP tutorial website</h5>
  </body>
</html

3.Test the operation of the website

Enter in the address bar of a web browser: http://localhost, then type Enter button. It should show a blank page with the subtitle OpenLDAP tutorial websiteIf this is not the case, check the default site configuration as the installation was probably changed after the web server was installed.
ls -l /etc/apache2/sites-enabled/
In response to this command we should have at least the line:
000-default.conf -> ../sites-available/000-default.conf
And the contents of this file must include:
 <VirtualHost desktop:80 >
  ServerName localhost
  DocumentRoot /var/www
  ...
 <VirtualHost>
If this isn’t the case, modiify and restart the server.

4. Enable and configure the mod-ldap of the Apache web server

The mod-ldap is an add-in for the web server apache2, it is installed but not enabled by default on Debian systems and compliant. If it is not installed, installationt must be done before any other action.
sudo a2enmod authnz_ldap
After activation, it should be configured for our OpenLDAP server:
sudo vi /etc/apache2/mods-enabled/ldap.conf
Modify the contents so that this file contains:
<Location />
  AuthType Basic
  AuthBasicProvider ldap
  AuthName "Enter login and password"
  AuthLDAPURL ldap://localhost/ou=People,dc=ldaptuto,dc=net?uid?sub?(objectClass=*)
  Require valid-user
</Location>
And finally restart the web server to enable this new configuration:
sudo service apache2 restart # Debian 7/ Ubuntu 14 or below
sudo systemctl restart apache2 # More recents versions

5. Testing the new configuration

In the address bar of a web browser type : http: // localhost, then type Enter. If all goes well, an authentication is now required to read the page: Notice the parameterized message that appears: “Enter login and password“.  Enter the identifier (uid) of Jean Dupond (dupond) and a false password (different from dupond): access is denied. Enter the correct password (dupond), access should be allowed. If you have enabled the production of OpenLDAP server logs (see Enable OpenLDAP Logging), you can also control the interaction between the two servers by examining the log file.]]>

OpenLDAP tutorial – Adding data to the directory

OpenLDAP Tutorial», we will feed the directory with useful data. This will make it possible to actually use the OpenLDAP server. Prerequisite:

1. Creating a node for people.

A directory must be organized. In an organization concern, we will first create a node (container) that will receive the directory entries of people. Create an LDIF file for this node:
vi people.ldif
Enter in the editor and save:
dn: ou=People,dc=ldaptuto,dc=net
objectClass: organizationalUnit
ou: People
  • People is a name of your choice.
  • The type of this new entry is organizationalUnit (OU), which is the usual type of container nodes in OpenLDAP.
  • OpenLDAP is case insensitive and does not differentiate between uppercase and lowercase, People or people are equivalent.
We add this entry to the directory:
ldapmodify -a -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f people.ldif
-a (to add) after ldapmodify means that you want to add the contents of the file.

2. Adding people to the directory

vi dupond.ldif
Enter in the editor and save:
dn: uid=dupond,ou=People,dc=ldaptuto,dc=net
objectClass: inetOrgPerson
givenName: Jean
sn: Dupond
cn: Jean Dupond
uid: dupond
userPassword: dupond
We add this entry to the directory:
ldapmodify -a -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f dupond.ldif
And we check this addition:
ldapsearch -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -b ou=People,dc=ldaptuto,dc=net
Notice that the password does not appear in plain text. however it is not encrypted.

3. Directory use

Now let’s look at what happens if Jean Dupond tries to connect to the directory and see the people referenced (among others himself).
ldapsearch -x -H ldap://localhost -D uid=dupond,ou=people,dc=ldaptuto,dc=net -w dupond -b ou=people,dc=ldaptuto,dc=net -LLL
ldap_bind: Invalid credentials (49)
  • -D: DN of the user who authenticates, the request uses the read rights of this user.
  • -w: The user password.
The result is an error message which means that the authenticationhas failed. However the data sent is correct (DN and password). The reason is an inadequate access right for authentication. We cannot address this sensitive and complex topic of rights here. We will just add a configuration that will allow directory users to authenticate.
vi acces.ldif
Enter in the editor and save:
dn: olcDatabase={1}mdb,cn=config
changeType: modify
add: olcAccess
olcAccess: to * by users read by anonymous auth by * none
This command adds authentication (by anonymous auth) and read permission to all people in the directory (by users read). Of course, it is not advisable to use such a configuration in real use. It is used here only for simple demonstration. We add this setting to the directory:
ldapmodify -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f acces.ldif
Now, a query to read the data of the people in the directory by Jean Dupond (same as the previous one) makes it possible to display them.
ldapsearch -x -H ldap://localhost -D uid=dupond,ou=people,dc=ldaptuto,dc=net -w dupond -b ou=people,dc=ldaptuto,dc=net -LLL
dn: ou=People,dc=ldaptuto,dc=net
objectClass: organizationalUnit
ou: People

dn: uid=dupond,ou=People,dc=ldaptuto,dc=net
objectClass: inetOrgPerson
givenName: Jean
sn: Dupond
cn: Jean Dupond
uid: dupond
userPassword:: e1NTSEF9Umk1d0QrWEtmNHRrSHBOelBEMkdqU3NNSUhtRmtNU28=
Finally, the directory served by OpenLDAP allows Jean Dupond, who is referenced there, to authenticate and read all the data it contains. As an exercise you can add another person to the directory: Alain Durand. After that the contents of this directory will have this structure:
dc=ldaptuto,dc=net
├── cn=admin,dc=ldaptuto,dc=net
└── ou=People,dc=ldaptuto,dc=net
    ├── uid=dupond,ou=People,dc=ldaptuto,dc=net
    └── uid=durand,ou=People,dc=ldaptuto,dc=net
]]>

Openldap tutorial – organization and data types

we’ll see how this directory server organizes its content. This is a necessary prerequisite to be able to put data to it. Once data is entered, the server will be ready for use. The main uses are: the authentication of users on the computer systems and the synchronization of data with these systems (e.g. email servers). The advantage of using LDAP servers for these functions is that this protocol has become a wide used standard. It’s supported by the most computer systems and applications that have this need. A coming article will deal with data feeding. Prerequisites:

1. Data organization in an OpenLDAP server

In an OpenLDAP server, the data is organized like a treeThere is the root of the tree: the DIT (Directory information tree), the trunk of the tree and moving after the trunk, we meet:
  • Nodes: Special type data that has the ability to contain other data.
  • Leaves: the data that can be of different types.
We can compare, by analogy, this organization to that of a file system on a computer disk. Here is the representation that would be obtained from the /etc/resolvconf folder by the command:
sudo tree /etc/resolvconf
– In blue, the nodes or folders in the file system. – In light blue and green, the data or files in the file system. To unambiguously designate the dnscache file for example, we use the full path (full qualified name – FQN): /etc/resolvconf/update.d/dnscache. This is necessary because there may be another file, which has the same name, somewhere else on the disk. For an LDAP directory the equivalent of the FQN is the DN (distinguished name) and it is the complete path from the root (ie the DIT).

2. Data types in an OpenLDAP server

There are a very large number of data types that can be used by the OpenLDAP server. In addition, these data types are scalable and constantly evolving. In practice it is advisable to choose a limited set of these types of data according to actual needs. To do this we must declare the schemas to be embedded in the configuration of the server. A scema is a description of the data types (metadata). This command lists the schemas embedded by the server:
ldapsearch -x -H ldap://localhost -s one -D cn=admin,dc=ldaptuto,dc=net -y pwdAdmin -b cn=schema,cn=config cn -LLL
dn: cn={0}core,cn=schema,cn=config
cn: {0}core

dn: cn={1}cosine,cn=schema,cn=config
cn: {1}cosine

dn: cn={2}nis,cn=schema,cn=config
cn: {2}nis

dn: cn={3}inetorgperson,cn=schema,cn=config
cn: {3}inetorgperson
The result is the one obtained just after the installation of an OpenLDAP server. These are the four embedded schema by default. They are sufficient for most basic uses of an LDAP directory.

3. The default contents of the OpenLDAP server

To get the full and actual contents of an OpenLDAP directory, you must run a search query in connected mode with the server administrator account (rootDN). This is the only account that is never subject to any access restrictions.
ldapsearch -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -y pwdAdmin -b dc=ldaptuto,dc=net -LLL
dn: dc=ldaptuto,dc=net
objectClass: top
objectClass: dcObject
objectClass: organization
o: OpenLDAP tutorial
dc: ldaptuto

dn: cn=admin,dc=ldaptuto,dc=net
objectClass: simpleSecurityObject
objectClass: organizationalRole
cn: admin
description: LDAP administrator
userPassword:: e1NTSEF9RzlwcjRUdkRJajlWOWpqYjFzMTJkczhaaDBrY2pzOXA=
The result is the one obtained just after installing an OpenLDAP server. Notice the values entered during the installation (or reconfiguration).
  • cn=admin: the server administrator identifier.
  • o=OpenLDAP tutorial: The organization label.
  • dc=ldaptuto,dc=net: the DIT (domain name).
  • userPassword: administrator password (encrypted).
There are only two entries in the directory tree: dc=ldaptuto,dc=net └── cn=admin,dc=ldaptuto,dc=net The values of the objectClass attribute determines the nature (or type) of the entry.
  • dc=ldaptuto, dc=net: has dcObject type, it is the special type that determines the root or DIT of the directory. This entry is the container for all data in this directory.
  • cn=admin,dc=ldaptuto,dc=net: has simpleSecurityObject type, data that represents an authentication account. Mainly contains the password of this account.
In upcoming articles we will see other types and will feed more the directory.]]>

OpenLDAP tutorial – Remotly configuration management by the administrator

Prerequisites: OpenlDAP is installed and pre configured on a Debian, Ubuntu or compliant system. cf. previous articles about OpenLDAP.

1. Avoid entering the administrator password at each command

Store the super administrator password (“admin” in the sample) in a file:
echo -n "admin" > ~/pwdAdmin
chmod 600 ~/pwdAdmin
This creates the «pwdAdmin» file that contains the super administrator password. To test its use:
ldapsearch -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -y ~/pwdAdmin -b dc=ldaptuto,dc=net
The advantage of using the server administrator account instead of the system administrator account (root) is that you can execute remote commands. Those commands may be launched from a desktop machine. in this case replace localhost with the DNS name of the remote machine or its IP address.

2. Super administrator access rights to server configuration

The configuration of the OpenLDAP server is located in the database under the DIT cn = config. It’s the equivalent of the configuration file slapd.conf content in the old-style work. By default the super administrator cannot access this configuration:
ldapsearch -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -y ~/pwdAdmin -b cn=config
The result of this command is empty. We will use the «root» system user’s extended rights to give the OpenLDAP server super administrator access to the configuration data. Create ths LDIF file «acces-admin.ldif» who has the content:
dn: olcDatabase={0}config,cn=config
changeType: modify
add: olcAccess
olcAccess: to * by dn.exact=cn=admin,dc=ldaptuto,dc=net manage by * break
Then, execute the modify command on the server:
sudo ldapmodify -Y external -H ldapi:/// -f acces-admin.ldif
This gives read and write rights on all configuration data of the server to the administrator (cn=admin,dc=ldaptuto,dc=net). It can easily be verified by running the previous query on this data and did not return any results.]]>

Enable the production of Openldap Log file

Goal: In this 3rd part of the «OpenLDAP tutorial», we will enable the production of Log. To do that we must change default configuration of the server. The production of OpenLDAP log is very important for supervision and the proper use of this server. Prerequisite: The OpenLDAP server is installed with its default configuration. The installation has been done on GNU/Linux Debian, Ubuntu OS or compliant system. cf. part 1 and part 2 of this «OpenLDAP tutorial» series.

1. Enable the production of server Logs

sudo ldapsearch -Y external -H ldapi:/// -b cn=config "(objectClass=olcGlobal)" olcLogLevel -LLL > slapdlog.ldif
This command creates the slapdlog.ldif file whose content is the result of the LDAP query executed by ldapsearch utility:
dn: cn=config
olcLogLevel: none
The first line contains the DN (distinguished name) who is the unique identifier of the entry. The second line contains the unique attribute requested by the query with value: none. The production of log files is disabled by default. Modify that file so that its content becomes:
dn: cn=config
changeType: modify
replace: olcLogLevel
olcLogLevel: stats
Now, this LDIF (Lightweight data interchange format) contains a modify command: the second line says we want to change the entry, the third line indicates that it is a replacement of the content of the olcLogLevel attribute and the fourth shows the new value of this attribute. stats level allow generate logs of connections, operations and results. This is perfect for daily monitoring. To run the command file on the server, we use:
sudo ldapmodify -Y external -H ldapi:/// -f slapdlog.ldif
If we get the message: modifying entry “cn=config”, the operation was successful. To check the result:
sudo ldapsearch -Y external -H ldapi:/// -b cn=config "(objectClass=olcGlobal)" olcLogLevel
This new setting is immediately considered by the server and no reboot is required. The server sends the produced Logs, to the system log management mechanism. This is rsyslog for recent versions of Debian / Ubuntu OS.

2. Consideration of OpenLDAP log in rsyslog

Create a configuration file in the folder /etc/rsyslog.d/choose any name10-slapd.conf for example. The number in the name classifies files in this folder. This file contains those settings:
$template slapdtmpl,"[%$DAY%-%$MONTH%-%$YEAR% %timegenerated:12:19:date-rfc3339%] %app-name% %syslogseverity-text% %msg%\n"
local4.*    /var/log/slapd.log;slapdtmpl
The chosen name slapdtmpl, refers to a presentation format of the contents of the log file. For details on the template creations for rsyslog consult the manual:
man rsyslog.conf
See, in particular the section TEMPLATES. Finally you must restart rsyslog for the new settings to take effect.
service rsyslog restart

3. Test this functionality of the OpenLDAP server

Start a query and view the contents of the file /var/log/slapd.log :
sudo ldapsearch -Y external -H ldapi:/// -b dc=ldaptuto,dc=net
sudo cat /var/log/slapd.log
You should have a fairly significant content that show the work done by the OpenLDAP server to produce the query result..]]>

OpenLDAP tutorial (2) – Modify the default settings

Goal: This«OpenLDAP tutorial» aims to show how to improve the basic server configuration viewed in OpenLDAP tutorial – Installation and basic configuration post. This reconfiguration allows to customize settings made by default in the installation procedure. This is a further step to prepare th server use in a real environment. Prerequisite: The OpenLDAP server is installed with its default configuration. The installation is  done on a host with Debian / Ubuntu OS or compliant. This reconfiguration must be made before filling the directory server with data. The reason is this will reset the database and set its contents to empty. This reconfiguration is done with the command:

sudo dpkg-reconfigure slapd
Following this a series of screens appear and asks you to enter settings or make choices.

Reconfiguring OpenLDAP – step 1

openldap tutorial openldap ubuntuChoose <No> to start the reconfiguration.

Reconfiguring OpenLDAP – step 2

openldap tutorial By default, the domain name configured for the host machine is taken. Enter the domain name, this sets the DIT in the directory. In this example: dc=ldaptuto,dc=net

Reconfiguring OpenLDAP – step 3

openldap tutorial openldap ubuntuEnter the name of the organization, a label attached to the DIT in the directory. For information only.

Reconfiguring OpenLDAP – step 4

openldap tutorial openldap ubuntuPassword of the directory administrator who is cn=admin,dc=ldaptuto,dc=net. The administrator has all the rights and it is not subject to any restrictions set.

Reconfiguring OpenLDAP – step 5

openldap tutorial The Database type to use. OpenLDAP can work with many types of databases like BDB, HDB and MDB, which are proposed by the installation procedure. MDB is the recommended database. It is more compact and powerful than HDB and BDB. MDB works without any special configuration and allows you to rename a sub-set of the directory (any node) just like HDB.

Reconfiguring OpenLDAP – step 6

openldap tutorial openldap ubuntuBehavior when uninstalling and then purge the package slapd. Choose whether the data files to be deleted or not (<No> is more cautious, <Yes> is more efficient).

Reconfiguring OpenLDAP – step 7

openldap tutorial Choose <Yes>. The data files will moved from /var/lib/ldap to /var/backup.

Reconfiguring OpenLDAP – step 8 (if it apears)

openldap tutorial openldap ubuntuChoose <No>, unless there is a good reason (eg maintain compatibility with old system). Following this step, the directory server is reset and restarted.

Check the new setting

sudo ldapsearch -Y external -H ldapi:///  -b dc=ldaptuto,dc=net ↵

SASL/EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth
SASL SSF: 0
# extended LDIF
#
# LDAPv3
# base <dc=ldaptuto,dc=net> with scope subtree
# filter: (objectclass=*)
# requesting: ALL
#

# ldaptuto.net
dn: dc=ldaptuto,dc=net
objectClass: top
objectClass: dcObject
objectClass: organization
o: OpenLDAP tutorial
dc: ldaptuto

# admin, ldaptuto.net
dn: cn=admin,dc=ldaptuto,dc=net
objectClass: simpleSecurityObject
objectClass: organizationalRole
cn: admin
description: LDAP administrator

# search result
search: 2
result: 0 Success

# numResponses: 3
# numEntries: 2
Noice the new DIT dc=ldaptuto,dc=net and its label o: OpenLDAP tutorial]]>

OpenLDAP tutorial – Installation

First article in a series “OpenLDAP tutorial”.The presentation is done step by step by showing all the details necessary for the final operation. The exposed installation has a minimum configuration for correct operation. Other articles will follow to improve the installation on different aspects. It is advisable to follow this series of posts in order:

  1. This article, installation and basic configuration.
  2. Modify the default settings
  3. Enable the production of Openldap Log file
  4. Remotly configuration management by the administrator
  5. Organization and data types
  6. Adding data to the directory
  7. Using OpenLDAP to protect access to a website
  8. OpenLDAP password policy – Managing users accounts
Prerequisite: Nothing about the OpenLDAP server.

OpenLDAP tutorial, step 1: Properly configure the host Debian / Ubuntu

The server installation procedure systematically sets up a database.  The DIT (like an instance in relational databases) is selected based on the domain name of the host machine.
hostname -f
This command returns the full qualified name of the machine. Example: desktop.meddeb.net. In this case the database will have as DIT: dc=meddeb,dc=net (the right part of the name from the 1st dot met). If the configuration does not suit you, it should be modified (files /etc/hostname and /etc/hosts).

OpenLDAP tutorial, step 2: Install the OpenLDAP server on Debian / Ubuntu

sudo apt-get purge slapd
sudo apt-get install slapd
The installation process will start and request the password of the server administrator. openldap tutorial, openldap ubuntu, openldap debianIn addition to the executable binary files, it is installed the files in folders:
  • /usr/lib/ldap/ : OpenLDAP overlay libraries, binary native files.
  • /etc/ldap/schema/ : OpenLDAP schemas availables, text files.
  • /etc/ldap/slap.d/ : Dynamic configuration, text files.
  • /var/lib/ldap/ : Installed database files.
  • /var/run/slapd/ : Run settings, text files.

OpenLDAP tutorial, step 3: Install the OpenLDAP client utilities

sudo apt-get install ldap-utils
This installs the Openldap client utilities , including the ldapsearch query tool. The configuration file of those tools, /etc/ldap/ldap.conf, may be very useful. It allows to set defaults queries parameters. This simplifies the interaction with the server. a typical contents of this file is:
BASE   dc=meddeb,dc=net
URI    ldap://localhost
SIZELIMIT      12
TIMELIMIT      15
DEREF          never
# TLS certificates (needed for GnuTLS)
TLS_CACERT      /etc/ssl/certs/ca-certificates.crt

OpenLDAP tutorial, step 4: Check the installation.

slapd -V ↵
@(#) $OpenLDAP: slapd  (Ubuntu) (Mar 17 2014 21:20:08) $
        buildd@aatxe:/build/buildd/openldap-2.4.31/debian/build/servers/slap
In this sample, the installed server version is 2.4.31
ldapsearch -Y external  -H ldapi:/// -b cn=config "(objectClass=olcGlobal)" -LLL ↵
SASL/EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth
SASL SSF: 0
dn: cn=config
objectClass: olcGlobal
cn: config
olcArgsFile: /var/run/slapd/slapd.args
olcLogLevel: none
olcPidFile: /var/run/slapd/slapd.pid
olcToolThreads: 1
This gives the global part of the configuration. This is a default setting. Notice the runtime parameters folder: /var/run/slapd/. Notice, also, the olcLogLevel parameter set to none. This value must be modified for better operation.
sudo ldapsearch -Y external  -H ldapi:/// -b dc=meddeb,dc=net -LLL ↵

ASL/EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth
SASL SSF: 0
dn: dc=meddeb,dc=net
objectClass: top
objectClass: dcObject
objectClass: organization
o: meddeb.net
dc: meddeb

dn: cn=admin,dc=meddeb,dc=net
objectClass: simpleSecurityObject
objectClass: organizationalRole
cn: admin
description: LDAP administrator
This gives the only two entries created by default in the directory:
  • dc=meddeb,dc=net, who is the DIT of the directory.
  • cn=admin,dc=meddeb,dc=net, who is the administrator of the directory and his password given during installation.
]]>

Openldap tutorial – Administration par interface graphique

Pré-requis: L’article Ajouter des données à l’annuaire ainsi que ses pré-requis sont lus. Le serveur OpenLDAP est installé et alimenté avec les données de l’article.

1. Installation de JXplorer.

JXplorer est un utilitaire d’administration de serveurs LDAP multiplateformes (écrit en Java, donc ne nécessite que la présence d’un JRE sur tout type de système). Vérifier la disponibilité de cet utilitaire sur le système:
apt-cache search jxplorer ↵
jxplorer - Navigateur LDAP en Java
Installation de jxplorer:
sudo apt-get install jxplorer
JXplorer étant un utilitaire avec interface graphique, il faudra le lancer à partir du menu du bureau installé. Par exemple sous KDE : Menu K / Applications / Développement / LDAP Browser (JXplorer)

Openldap tutorial jxplorer2. Connexion au serveur

Pour se connecter au serveur OpenLDAP il convient d’utiliser le menu: Fichier / Se connecter. L’utilisation de ce menu affiche la fenêtre de connexion: Hote: localhost (ou 127.0.0.1), Si le serveur est sur une machine différente utiliser l’adresse IP de cette machine. Port: Par défaut le port ldap est 389, donc utiliser cette valeur sauf exception. Protocole: Utiliser LDAP v3, car c’est la version actuelle du protocile LDAP (sauf exception de système ancien) Base DN: Le noeud de l’arbre qui constituera la racine des données accédées, utiliser le DIT du serveur pour tout avoir. Sécurité / Niveau: Utilisateur + Mot de passe. Les autres niveaux de sécurités ne seront pas abordés ici. Utilisateur DN: Le DN de l’utilisateur de connexion, utiliser le DN de l’administrateur du serveur. Mot de passe: Utiliser le mot de passe configuré pour l’utilisateur choisi. Un click sur le bouton “OK” lance la connexion. En cas d’erreur, un message s’affiche pour indiquer le type d’erreur. Si les paramètres saisi sont corrects la connexion s’établit.

3. Navigation dans le contenu des données.

Deux volets principaux permettent d’explorer les données gérées par le serveur. Openldap tutorial jxplorerLe volet de gauche permet de naviguer dans l’arborescence des données. Le volet de droite affiche les données relatives à l’objet selectionné dans le volet de gauche. Il permet également (sous reserve de droits) de modifier les données de cet objet.

4. Ajouter une personne à l’annuaire OpenLDAP

Pour ajouter une personne, il convient de se placer (volet gauche) sur le noeud “People”. Utiliser, après cela le menu Editer / Nouveau Openldap tutorial jxplorerSaisir dans le champ RDN: uid=petit et cliquer sur le bouton “Ajouter” Openldap tutorial jxplorerCompléter la saisie des données: sn : Petit, givenName: Michel, cn: Michel Petit et userPassword. La saisie du mot de passe (userPassword) se fait dans une fenêtre séparée. Openldap tutorial jxplorerSaisir deux fois, dans les deux champs de siaise: petit. La combobox permet de sélectionner le niveau de cryptage souhaité: SHA ou SSHA constituent un bon choix. Cliquer sur “OK” pour valider le mot de passe, ensuite sur “Soumettre” pour valider la nouvelle entrée.

5. Ajouter un noeud conteneur

Si on souhaite ajouter des structures à l’annuaire (direction, service informatique..), il convient d’ajouter un noeud conteneur au même niveau que “People”. Il faut d’abord se placer sur le DIT “ldaptuto” et utiliser ensuite le menu Editer / Nouveau. Openldap tutorial jxplorerSupprimer les classes “simpleSecurityObject” et “organizationalRole” car elles ne correspondent pas à un noeud conteneur. Pour cela utiliser le bouton “Supprimer”. Openldap tutorial jxplorerAjouter la classe “organizationalUnit”. Utiliser le bouton “Ajouter” après la selection de la classe dans la liste. Saisir, ensuite, dans le champ RDN celui du noeud à créer: ou=Structures. Cliquer enfin sur le bouton “Ajouter”. Openldap tutorial jxplorerLe bouton “Soumettre” permet d’enregistrer cette modification et valider la création du noeud conteneur.]]>

OpenLDAP password policy – Mieux sécuriser les comptes des utilisateurs

overlay) qui permet de mettre en place une gestion efficace des comptes d’authentification des personnes référencées dans l’annuaire OpenLDAP. Cette gestion concerne notamment les mots de passe de ces personnes. Cet article montrera la manière de configurer le serveur OpenLDAP pour activer le module « password policy » et mettre en place cette gestion. Pré-requis: L’article Ajouter des données à l’annuaire ainsi que ses pré-requis sont lus. On suppose, également, que le serveur OpenLDAP a été installé et alimenté avec les données de l’article. Pour aller plus loin à ce sujet: La démarche présentée ici constitue le volet système de bas niveau de cette fonctionnalité. L’expiration d’un compte (mot de passe), par exemple, nécessite la mise à disposition des utilisateurs finaux une interface pour modifier leurs mots de passe facilement.

1. Activer le schéma ppolicy (OpenLDAP password policy)

A l’installation du serveur OpenLDAP sur un système Debian ou compatible, le schéma ppolicy est installé: /etc/ldap/schema/ppolicy.ldif, mais il n’est pas activé. Pour l’activer:
ldapmodify -x -a -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f /etc/ldap/schema/ppolicy.ldif
Pour vérifier le chargement effectif du schéma:
ldapsearch -x -s one -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -b cn=schema,cn=config cn -LLL

dn: cn={0}core,cn=schema,cn=config
cn: {0}core

dn: cn={1}cosine,cn=schema,cn=config
cn: {1}cosine

dn: cn={2}nis,cn=schema,cn=config
cn: {2}nis

dn: cn={3}inetorgperson,cn=schema,cn=config
cn: {3}inetorgperson

dn: cn={4}ppolicy,cn=schema,cn=config
cn: {4}ppolicy
Remarquer la présence du schéma ppolicy en plus des quatre schémas activés par défaut.

2. Activer le module ppolicy

Créer le fichier de commande LDIF: ppolicy-module.ldif
vi ppolicy-module.ldif
Saisir dans l’éditeur et enregistrer:
dn: cn=module{0},cn=config
changeType: modify
add: olcModuleLoad
olcModuleLoad: ppolicy
Exécuter la commande de modification contenue dans le fichier:
ldapmodify -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f ppolicy-module.ldif
Pour vérifier l’activation effective du module:
ldapsearch -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -b cn=config "(objectClass=olcModuleList)" olcModuleLoad -LLL

dn: cn=module{0},cn=config
olcModuleLoad: {0}back_hdb
olcModuleLoad: {1}ppolicy
Remarquez la présence du module ppolicy dans la liste. Initialement, il n’y avait que le module de gestion de la base de données back_hdb  qui est activé.

3. Configurer le module ppolicy

Créer le fichier de commande LDIF: ppolicy-conf.ldif
vi ppolicy-conf.ldif
Saisir dans l’éditeur et enregistrer:
dn: olcOverlay=ppolicy,olcDatabase={1}hdb,cn=config
objectClass: olcPpolicyConfig
olcOverlay: ppolicy
olcPPolicyDefault: cn=ppolicy,dc=ldaptuto,dc=net
olcPPolicyUseLockout: FALSE
olcPPolicyHashCleartext: TRUE
Ajouter l’entrée du fichier:
ldapmodify -x -a -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f ppolicy-conf.ldif
Pour vérifier la prise en compte effective de la configuration:
ldapsearch -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -b cn=config "(objectClass=olcPpolicyConfig)" -LLL

dn: olcOverlay={0}ppolicy,olcDatabase={1}hdb,cn=config
objectClass: olcPPolicyConfig
olcOverlay: {0}ppolicy
olcPPolicyDefault: cn=ppolicy,dc=ldaptuto,dc=net
olcPPolicyHashCleartext: TRUE
olcPPolicyUseLockout: FALSE
Trois paramètres de configuration:
  1. olcPPolicyDefault: Indique un DN de configuration utilisé par défaut (cf. paragraphe suivant).
  2. olcPPolicyHashCleartext: Indique si les mots de passe doivent être cryptés systématiquement. Ce paramètre devrait être à TRUE sauf cas exceptionnel.
  3. olcPPolicyUseLockout: Indique si le message d’erreur retourné en cas de tentative de connexion à un compte verrouillé est un message spécifique à cet état de verrouillage (TRUE), ou un message général d’echec de connexion (FALSE). FALSE est plus sécurisé (pas d’indication à un éventuel pirate), TRUE est plus pratique.

4. Configurer une politique de mots de passe

Il s’agit de configurer l’entrée indiquée dans le paramètre olcPPolicyDefault de la configuration du module ppolicy, c’est à dire: cn=ppolicy,dc=ldaptuto,dc=net. Pour cela on va créer un fichier LDIF qui permettra d’ajouter cette entrée.
vi ppolicy-defaut.ldif
Saisir dans l’éditeur et enregistrer:
dn: cn=ppolicy,dc=ldaptuto,dc=net
objectClass: device
objectClass: pwdPolicyChecker
objectClass: pwdPolicy
cn: ppolicy
pwdAllowUserChange: TRUE
pwdAttribute: userPassword
pwdCheckQuality: 1
pwdExpireWarning: 600
pwdFailureCountInterval: 30
pwdGraceAuthNLimit: 5
pwdInHistory: 5
pwdLockout: TRUE
pwdLockoutDuration: 0
pwdMaxAge: 0
pwdMaxFailure: 5
pwdMinAge: 0
pwdMinLength: 5
pwdMustChange: FALSE
pwdSafeModify: FALSE
Ajouter l’entrée:
ldapmodify -x -a -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f ppolicy-defaut.ldif
Pour vérifier la prise en compte de cet ajout:
ldapsearch -x -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -b dc=ldaptuto,dc=net "(objectClass=pwdPolicy)" -LLL
16 Paramètres (tous les attributs listés) permettent de configurer une politique efficace et performante de mots de passe et de gestion des comptes utilisateurs. La commande suivante permet d’avoir tous les détails à propos de ces paramètres:
man slapo-ppolicy
A titre d’exemple, la valeur de pwdMinLength est 5, ce qui signifie qu’un mot de passe ne peut pas avoir une longueur inférieure à 5 caractères. Testons:
ldappasswd -x -H ldap://localhost -D uid=durand,ou=people,dc=ldaptuto,dc=net -w durand -s dura

Result: Constraint violation (19)
Additional info: Password fails quality checking policy
Cette commande permet à Alain Durand de se connecter avec son identifiant et mot de passe (-D uid=durand,ou=people,dc=ldaptuto,dc=net et -w durand) et modifier ce mot de passe avec la nouvelle valeur fournie (-s dura). La commande échoue car le nouveau mot de passe comporte 4 caractères.
ldappasswd -x -H ldap://localhost -D uid=durand,ou=people,dc=ldaptuto,dc=net -w durand -s duran
La commande réussit car le nouveau mot de passe comporte 5 caractères. Pour vérifier la prise en compte de cette modification:
ldapsearch -x -H ldap://localhost -D uid=durand,ou=people,dc=ldaptuto,dc=net -w durand -b dc=ldaptuto,dc=net

ldap_bind: Invalid credentials (49)
Le serveur n’a pas accepté l’ancien mot de passe. Si on utilise la même commande avec le nouveau mot de passe : duran, le serveur l’acceptera. Un autre paramètre: pwdCheckModule permet de contrôler la qualité du contenu des mots de passe. Ce paramètre indique le nom du fichier d’une librairie dynamique partagée native qui se charge de cette fonction. Avant de le renseigner il faudra d’abord s’assurer que cette librairie est présente. Une telle librairie est disponible à l’installation à partir de son site Internet. Il convient de l’installer et ensuite renseigner ce paramètre en modifiant le paramétrage de la politique de mots de passe par défaut:
vi modifpp.ldif
Saisir dans l’éditeur et enregistrer:
dn: cn=ppolicy,dc=ldaptuto,dc=net
changeType: modify
add: pwdCheckModule
pwdCheckModule: pqchecker.so
Exécuter la modification:
ldapmodify -x -a -H ldap://localhost -D cn=admin,dc=ldaptuto,dc=net -w admin -f modifpp.ldif
pqchecker.so est la librairie de contrôle de la qualité du contenu des mots de passe. Cette librairie est installée par défaut dans /usr/lib/ldap. Par défaut également elle oblige à utiliser un mot de passe avec au minimum 1 caractère majuscule, 1 minuscule, 1 chiffre et 1 caractère spécial (non alphabétique). Plus de renseignements à ce propos peuvent être trouvés sur http://www.meddeb.net/pqchecker.]]>